The Slide Gate Plate System is used to cast molten steel into tundish or ingots in a controlled manner. The Slide Gate Plates are placed outside the ladle and consist of two refractory plates – one fixed and another moving. The fixed plate is also called top plate and sliding plate is also called bottom plate.

We mainly manufacture the unburned slide gate plate as follows:

1.1QC slide gate plate

2.2QC slide gate plate

3.FLOCON 4200 slide gate plate

4.FLOCON6300 slide gate plate

5.LS70 slide gate plate

6.FT160 slide gate plate

7.2bk,3bk slide gate plate

The ladle shroud nozzle for continuous casting is also called the protective sleeve. It is an important component connecting the ladle and the tundish. It is connected to the lower shroud of the sliding shroud device at the bottom of the ladle, and the lower end extends into the tundish.

The shroud is an important functional refractory material for maintaining casting and improving steel quality. The length of the shroud is generally 600-1800mm, the pipe diameter is 90-150 mm, and the structure of the ladle shroud nozzle is shown in Figure 2. Its use conditions are harsh and must have the following functions: excellent thermal shock resistance; good mechanical strength; excellent resistance to alternating corrosion of molten steel and slag, high oxidation resistance, and in addition, other suitable properties are required for some special steel grades.more information,please check here